The Family Behind AN Irrigation Co Sprinkler Systems

How we actually run a job

Every project starts the same way, with a free on-site visit. We put a gauge on your outside tap and measure static and working pressure, time the flow, and walk the yard noting sun, shade, slope, and what's planted where. Those numbers decide everything downstream, because the count of heads a zone can carry comes straight off the available flow. Guess at it, the way rushed installers do, and you get a system that mists weakly instead of spraying, no matter how long it runs.

From there you get a written, itemized quote laid out zone by zone, so you can see what each part of the yard costs and why. If you go ahead, we book utility locates before any machine touches grass, because gas and cable run shallow in plenty of Calgary yards and a vibratory plow will find them the hard way if nobody checked. The install itself usually takes one to two days. The plow slits the turf rather than trenching it open, the valves go into accessible boxes instead of being buried loose, and poly pipe goes in the ground because it handles our frost and ground movement far better than rigid pipe does.

Before we call any job finished, we run every zone with you standing there. You watch the coverage, we adjust arcs and spray patterns on the spot, and we program the controller together so you understand what it's doing and how to change it yourself. Then the site gets cleaned up, and you keep our number for the fall blowout.

Guess-and-replace is how repair bills balloon, and we don't work that way.

Repairs run on the same discipline. When a zone is dead or a lawn is browning in patches, we test the chain in order (controller, wiring, solenoid, valve, pressure, heads) until the actual fault shows itself, then quote the fix in writing before touching anything. Guess-and-replace is how repair bills balloon, and we don't work that way.

Why we push the seasonal rhythm so hard

An irrigation system in Calgary lives or dies on two appointments a year: the spring start-up and the fall blowout. Skip the blowout and any water left in the lines freezes, expands, and splits pipe and valves underground, where the damage hides until spring. Rush the start-up and the pressure spike cracks the fittings winter spared. We book both in blocks through the season, remind our install customers when their window opens, and would rather run a blowout a week early than gamble against the first hard frost, which in this city has a habit of showing up in September without asking anyone.

That's the company in a sentence: one trade, done carefully, in one place. If that sounds like the kind of outfit you want touching your yard, call us or send the estimate form and we'll come take a look.